0 | £0.00
Basket
Sign in

How To Frame Cross Stitch

 
Framing your completed designs is a great way to display all of your hard work. The easiest way to mount work for framing is to use foam board, which is board constructed of foam sandwiched between two layers of acid-free card.

If you have used dark thread or fabric for your background, it is best to use dark foam board. If you can’t find any, just add a sheet of dark acid-free card between the stitching and board. To find out how to frame cross stitch professionally,
simply follow the instructions below.






 
1. Cut a piece of foam board to fit inside your chosen frame, cutting it slightly smaller than your blocked stitching to allow room for the fabric and pins.

2.  Position your design centrally over the foam board. Fold the corner over, as shown. Using stainless steel flat-headed pins, secure the stitching to the foam board by pushing a pin into the foam part of the board at the centre of each side. Repeat along each edge, gradually working out from the centre pin and gently pulling the fabric tight as you go. Keep checking that your work is still central.

3.  Once all the edges have pins along them, mitre the corners neatly and secure using a few stitches. At this stage you could also lace across the back, as shown, to make the work more secure.

4.  Place the work in the frame and cover with the backboard. Tape up the back using brown gum tape.

 
 
Black Frame
£9.99

 
Holiday Red Frame
£9.99

 
Antique White Frame
£9.99

 


We hope this guide helped you to learn how to frame cross stitch. Be sure to check out our guides on how to cross stitch, choosing a cross stitch fabric, how to use a hoop, how to choose the right workstand and take a look at our beginner's cross stitch kits.  


Happy Stitching!

Recently viewed items

Empty
  • Contact Information

  • Telephone: 0800 013 0150
  • Address: Sew and So
  • Unit 6A
  • Delta Drive
  • Tewkesbury. GL20 8HB
powered by PRIAM © 2017